Commissioning HMI Advanced (IM4) 08/2005
2 Functions/Parameterization
© Siemens AG, 2005. All rights reserved
IM4/2-62 SINUMERIK 840D sl/840D/840Di/810D Installation and Start-Up HMI (IAM) - 08/2005 Edition
There may be more than one Task<No.>= name := mntmmc, ... entry if several
sections in TASKCONF.INI have been defined with skeleton application
parameters. This also allows operating trees to be designed with multiple levels.
TASKCONF.INI
[SectionName1]
; REGIE.INI must contain a reference to the section name selected by the user.
; Sample entries:
; The Services application should be activated when the skeleton application
; is started for the first time
; The StartIndex entry specifies the softkey index that activates the
; desired task when the program is started
; Services with StartIndex 5 in this example
StartIndex = 5
; Home screen for the skeleton application, for more details see below
Picture= Skeleton1.bmp
; the first softkey is assigned the Program task (task index 2) as child (HSK1IsTask=0)
; with the <root> parameter, the softkey texts specified for German (via default)
; and English (UK)
HSK1Task=2
HSK1IsTask=0
; application-specific parameter: In this case, return to base level for the
; Program application, parameter: <root>
HSK1Command=<root>
HSK1SkText=Program ; No language specified is the default setting
; for all non-configured languages
HSK1SKText _UK=Program ; softkey label in English (_UK)
; the fifth softkey is assigned the Services task (task index 3) as child (HSK1IsTask=0)
; with the empty command parameter, the softkey texts specified for the default German
; (_GR) and English (_UK)
HSK5Task=3
HSK5IsTask =0
HSK5Command=
HSK5SkText=SERVICES
HSK5SkText _GR=Services
HSK5SkText _UK=service
; Access authorizations for the "Services" softkey
HSK5AccessLevel= 3
; the 2nd softkey in the ETC bar is assigned the Setup task (task index 5) as child
; (HSK10IsTask=0) assigned with empty command parameter,
; the softkey texts specified for German (_GR) and English (_UK)
HSK10Task=5
HSK10IsTask=0
HSK10Command=
HSK10SkText _GR=Setup
To Next Page
Loading...
Need help?
General
