Sony CBK-HD01 - Page 101

4-11
PDW-700/V1 (E)
VF DISP 2 Display (Setting the VF displays)
Item Setting Function
DISP ZOOM OFF/ON Turns ON/OFF the zoom position display
DISP COLOR TEMP OFF/ON Turns ON/OFF the color temperature display
DISP BATT REMAIN
*1
INT/VOLT/AUTO Selects the mode for the remaining battery (or DC IN) voltage display
DISP DC IN OFF/ON Turns ON/OFF the display when the power is supplied from the
external connector (the battery connected to DC IN)
DISP 16:9/4:3 ID
*2
OFF/ON Displays the video aspect ratio (16:9/4:3)
DISP WRR RF LVL OFF/ON Turns ON/OFF the wireless receiver RF level display
DISP REC FORMAT OFF/ON Turns ON/OFF the recording format
DISP CLIP NO (PB) OFF/ON Turns ON/OFF the clip name
DISP TIME CODE OFF/ON Turns ON/OFF the time-code display
DISP ALAC OFF/ON Turns ON/OFF the operating status display of ALAC
*1 : When an Anton Bauer battery system or a BP-GL65/GL95 battery pack is installed, the remaining battery power is shown as a
percentage value (%) according to the setting of this item.
INT : When one of the above batteries is installed, the remaining power is shown as a percentage value (%) when there is a
change in the value or when the power is low.
AUTO : The remaining power is shown as a percentage value (%) when one of the above batteries is installed. Otherwise the
voltage (VOLT) is displayed continuously.
VOLT : The voltage (VOLT) is displayed continuously.
*2 : Displayed only when CBKZ-MD01 SD Record and Playback Software is installed.
VF DISP 3 Display (Setting the VF displays)
Item Setting Function
LOW LIGHT OFF/ON Turns ON/OFF the on-screen warning that the average level of the
video has dropped beneath a set level
LOW LIGHT LEVEL (_99 to 99) Sets the LOW LIGHT threshold value
VF BATT WARNING 10%/20% Specifies the remaining battery capacity level that starts the flashing
warning in the viewfinder
ABSOLUTE VALUE OFF/ON Turns ON/OFF the mode that displays numeric menu settings as
absolute values
*
* : This makes it possible to display settings that include reference settings, stored with STORE ALL PRESET or other functions, as
absolute values.
O09 VF DISP2 TOP
DISP ZOOM : ON
DISP COLOR TEMP : OFF
DISP BATT REMAIN: INT
DISP DC IN : OFF
DISP 16:9/4:3 ID: OFF
DISP WRR RF LVL : OFF
DISP REC FORMAT : OFF
DISP CLIP NO(PB): ON
DISP TIME CODE : OFF
DISP ALAC : OFF
O10 VF DISP3 TOP
LOW LIGHT : OFF
LOW LIGHT LEVEL : 0
VF BATT WARNING : 10%
ABSOLUTE VALUE : OFF