4-33
PDW-700/V1 (E)
SD DETAIL Display (Adjusting DETAIL of SD)
Item Setting Function
SD DETAIL OFF/ON Turns ON/OFF the SD detail correction function
SD DETAIL LEVEL (_99 to 99) Sets the overall SD detail signal level
SD CRISPENING (_99 to 99) Sets the SD crispening level
SD DTL WHT LIMIT (_99 to 99) Limits the white peak of the SD detail signal
SD DTL BLK LIMIT (_99 to 99) Limits the black peak of the SD detail signal
SD LEVEL DEPEND OFF/ON Turns ON/OFF the level depend function (This function
decreases the amount of detail signal when the video
signal amplitude is small)
SD LV DEPEND LVL (_99 to 99)
Sets the range of video signal amplitude that is suppressed
by the level depend
SD DTL FREQUENCY (_99 to 99) Sets the frequency (thickness) of the H. SD detail signal
SD DTL H/V RATIO (_99 to 99) Sets the SD V. detail signal level only
SD CROSS COLOR (_99 to 99) Sets the SD cross-color reduction level
(When NTSC(J)AREA or NTSC AREA is selected on the
FORMAT)
P09 SD DETAIL TOP
SD DETAIL : OFF
SD DETAIL LEVEL : 0
SD CRISPENING : 0
SD DTL WHT LIMIT: 0
SD DTL BLK LIMIT: 0
SD LEVEL DEPEND : ON
SD LV DEPEND LVL: 0
SD DTL FREQUENCY: 0
SD DTL H/V RATIO: 0
SD CROSS COLOR : 0
To Next Page
Loading...
