4-49
PDW-700/V1 (E)
CAM CONFIG 3 Display (Setting-3 on camcorder)
Item Setting Function
ALAC OFF/AUTO Sets the operation of the lens aberration correction
function
OFF : Turns OFF the function forcibly even when the
lens that supports the aberration correction
function is mounted
AUTO : Turns ON the function when the lens that
supports the aberration correction function is
mounted
PRESET WHT Display (WHITE BAL switch: The function to adjust the white balance gain that is
assigned to PRST)
Item Setting Function
COLOR TEMP <P> Displays the color Sets the white balance preset
temperature Reference : The R GAIN and B GAIN values also change accordingly at
(Guideline) the same time.
C TEMP BAL <P> (_99 to 99) Uses this item for fine adjustment when the optimum color
cannot be obtained by the above COLOR TEMP
Reference : The R GAIN and B GAIN values also change accordingly at
the same time.
R GAIN <P> (_99 to 99) Uses this menu item to set the color temperature of a WHITE preset value,
by adjusting R GAIN
B GAIN <P> (_99 to 99) Uses this menu item to set the color temperature of a WHITE preset value,
by adjusting B GAIN
AWB ENABLE <P> OFF/ON Turns ON/OFF the function that sets the white balance adjustment value as
the preset value when the white balance automatic adjustment is executed
with the WHITE BAL switch being set in PRST
M15 PRESET WHT TOP
COLOR TEMP <P>: 3200
C TEMP BAL <P>: 0
R GAIN <P>: 0
B GAIN <P>: 0
AWB ENABLE <P>: OFF
M14 CAM CONFIG 3 TOP
ALAC : AUTO
To Next Page
