a) electrical specification of this output are as follows: 0 V to 3 V voltage range, 51 Ω output
impedance,
b) output produces a voltage level (not impulse),
c) Active Level setting may be selected by the user in menu as Low or High. When High is
selected, the output alternates from 0 V to 3 V till measurement result is greater than
threshold value,
USB interface
The SVAN 958 USB interface enables remote control of the instrument and data transfer up to attainable with
12 MHz clock.
There are two USB ports available on the SVAN 958 bottom panel.
USB Device port
It meets USB requirements and enables remote control of the instrument and data transfer up to attainable
with 12 MHz clock.
USB socket (external view)
Table C.8.5. Pin-out of the USB-Device connector
USB Host port
USB socket (external view)
To Next Page
Loading...
