4.5.2 Logger trigger setup – Logger Trigger 42
4.5.3 Alarm trigger setting – Alarm Trigger 43
4.5.4 Alarm on SMS trigger setting – Alarm SMS Notification 44
4.5.5 Alarm on e-mail trigger setting – Alarm E-mail Notification 44
4.5.6 Definition of triggering conditions for logger and alarms – Trigger Events Setup 44
5 DATA AVAILABLE ON THE DISPLAY – Display 47
6.1 Selection of the modes of measurement results presentation – Display Modes 47
6.2 Setting the parameters of graphical presentations – Display Setup 51
6.3 Checking the instrument powering – Power Supply 52
6.4 Setting the display brightness and power saver – Screen Setup 52
6.5 Checking the modem status – Modem Status 53
6.6 Checking the specification of the instrument – Unit Label 53
6 SAVING THE MEASUREMENT RESULTS – File 54
7.1 Saving files in the instrument’s memory or external memory 55
7.2 Controlling data storing in the instrument’s memory – Save Options 56
7.3 Loading files with the measurement results – Load File 58
7.4 Checking the contents of the loaded file – Logger View 58
7.5 Removing file with the measurement results – Delete 59
7.6 Removing all files with measurement results from memory – Delete All 59
7.7 Merging result and setup files memory – Defragmentation 60
7.8 Checking the contents of the memory – Catalogue 60
7.9 Checking the free space in the memory – Free Space 60
7.10 Saving setup in the instrument’s memory – Save Setup 61
7.11 Options for setup files – Setup Options 61
7.12 Loading the files with the configuration – Load Setup 61
7.13 Checking the contents of the USB memory disk – USB Directory 61
7 ADDITIONAL SETTINGS – Setup 63
7.1 Setting the language of the user interface – Language 64
7.2 Return to the factory settings – Clear Setup 64
7.3 Automatic measurement start – Auto Start 64
7.4 Day time limits selection – Day Time Limits 64
7.5 Selection of the extended mode – Ext. I/O Setup 65
7.6 Turning off instrument due to low external voltage – Ext. Power Setup 66
7.7 Programming keyboard – Keyboard Setup 66
7.8 Locking the menu – Menu Lock 67
7.9 Reference signal in vibration measurements – Reference Levels 67
7.10 Activating the remote control error confirmation – Remote Control Setup 67
To Next Page
Loading...
