Svantek SVAN 958A - Page 5

5
SVAN 958A User Manual
7.11 Selection of detector’s type in the LEQ (RMS) calculations – RMS Integration 67
7.12 Setting the parameters of the serial interface – RS232 Setup 68
7.13 Programming the instrument’s internal Real Time Clock – RTC 68
7.14 Selection of statistics levels to be saved in a file – Statistical Levels 69
7.15 Programming the instrument’s internal timer – Timer 69
7.16 Programming the instrument’s socket named USB Host – USB Host Setup 70
7.17 Setting user filter coefficients for 1/1 Octave and 1/3 Octave analysis – User Filters 71
7.18 Selection of the Vibration units – Vibration Units 71
7.19 Warnings selection – Warnings 72
7.20 Parameters of remote communication – Wireless Communication 72
7.20.1 Selection of the network type – Network Setup 73
7.20.2 Configuration of modem basic settings – Modem Setup 73
7.20.3 Setting of support modem options – Modem Connection 74
7.20.4 Configuration of SMS service – SMS Option 75
7.20.5 Configuration of e-mail service – E-mail Settings 75
8 CALCULATION OF DOSE PARAMETERS – Auxiliary Functions 77
8.1 Calculation of hand-arm or whole-body vibration dose 77
9 PRINTING REPORTS – Report 79
9.1 Edit the user title of the report – Title 80
9.2 Printing the measurement results – Print Results 80
9.3 Selection the printing options – Print Options 81
10 1/1 AND 1/3 OCTAVE ANALYSER 82
10.1 Selecting 1/1 Octave or 1/3 Octave analysis function 82
10.2 Configuring 1/1- or 1/3-octave analyser 82
10.3 Selection of 1/1 Octave and 1/3 Octave bandpass results as triggering source 83
10.4 Display options in 1/1 Octave and 1/3 Octave analysis mode 85
10.5 Presentation of 1/1 Octave and 1/3 Octave analysis results 85
10.6 Setting the scale of the spectrum results presentation – Display Scale 86
10.7 Setting parameters of the spectrum presentation – Spectrum View 87
10.8 Setting parameters for total values – Total Values 87
10.9 Setting user filter coefficients for 1/1 and 1/3 Octave – User Filters Setup 88
11 DOSIMETER 90
11.1 Selecting Dosimeter function 90
11.2 Selecting dosimeter parameters – Dosimeter Setup 90
12 FFT ANALYSER 92
12.1 Selecting FFT analysis mode 92
12.2 Selecting FFT analysis parameters – FFT Setup 92