Svantek SVAN 958A - Page 6

6
SVAN 958A User Manual
12.3 Display options in FFT analysis mode 94
12.4 Presentation of FFT analysis results 94
12.5 Setting the scale of the spectrum results presentation – Display Scale 95
12.6 Setting parameters of the spectrum presentation – Spectrum View 95
13 CROSS-SPECTRUM 96
13.1 Selecting Cross Spectrum function 96
13.2 Selecting channels for cross-spectrum analysis – Cross Spectrum Setup 96
14 SOUND INTENSITY 98
14.1 Selection of Sound Intensity function 98
14.2 Selection of parameters for sound intensity analysis – Intensity Setup 98
15 REVERBERATION TIME 99
15.1 Selecting RT60 function 99
15.2 Setting RT 60 parameters 99
15.3 Configuring results view 102
15.4 Starting RT60 measurement 102
15.5 Visualization of the RT 60 measurements results 103
16 WAVE RECORDER 106
16.1 Selecting Wave Recorder function 106
16.2 Configuring wave recording parameters – Wave Parameters 106
Appendix A. REMOTE CONTROL (v4.16.2) 107
A.1. Input / output transmission types 107
A.2. Function #1 – input / output of the control setting codes 107
A.3. Function #2 – read-out of the measurement results in the SLM or VLM mode 109
A.4. Function #3 – read-out of the measurement results in 1/1 OCTAVE and 1/3 OCTAVE mode 112
A.5. Function #4 – read-out of the data file from the internal flash-disc and/or the special file located
in the RAM memory 113
A.6. Function #5 – read-out of the statistical analysis results 115
A.7. Function #6 – remote setting of the user filters 116
A.8. Function #7 – special control functions 118
A.9. Function #9 – writing setup files to the internal flash-disc 122
A.10. Control setting codes 123
Appendix B. DATA FILE STRUCTURES (v4.16) 139
B.1. Structure of the SVAN 958A file 139
B.2. Structure of the block with meteorological data 168
B.3. Structure of the file with the results from Level Meter and Wave Recorder Modes 169
B.4 Structure of the file with 1/1 OCTAVE analysis results 170