(5) Water supply begins.
When [Set] key is pressed, water supply will begin and the message "Water supply running" will
appear. To stop water supply while it is in progress, press [Cancel] key.
NOTE: Filling the hydraulic line with rinse solution takes 35 sec or so.
Cancel
Water supply running
HC IP
Supply Liquid
Ready
Replace Rack? YES!
Sysmex
Figure B-17: "Water supply running" Message Screen
(6) Water supply is completed.
When water supply is over, the Special Operation Menu screen will return.
CA-500 Series S/M B-12 Revised December 2001 8
To Next Page
Loading...
