SYSMEX CA-500 - 5.9 OUTPUT OF SERVICE SETTINGS

5.9 OUTPUT OF SERVICE SETTINGS
(1) Press [Special Operate] Æ [Service] Æ [Print Service Set.] keys, then the following screen will be
displayed.
Ready
Replace Rack? YES!
Service Setting
Print Service Set.
Sysmex
Return
IP
Flag Threshold
Test Mode
Reag. Vial Settings
Figure 5-9-1: Print Service Setting Screen
[Service Setting] Key
Use to output the service setting values.
[Flag Threshold] Key
Use to output the flag threshold values for every tests.
[Test Mode] Key
Use to output the test mode values.
[Reag. Vial Settings] Key
Use to output the reagent vial setting values.
[Return] or [Quit] Key
Quits to output service settings and returns to Service Menu screen.
CA-500 Series S/M 5-21 Revised December 2001 8