SECTION 4 ADJUSTMENT
4.1 Pressure Adjustment ..............................................................................................................................1
4.1.1 Adjustment of Pressure Detector Circuit....................................................................................1
4.1.2 Adjustment of Pressure Indication ............................................................................................. 3
4.2 Detector Block Sensitivity Adjustment .................................................................................................... 4
4.2.1 Required Tools for Adjustment .................................................................................................. 4
4.2.2 Overview of Adjustment Screen (Description) ........................................................................... 4
4.2.3 Adjustment of Detector Well for analyzing the scattered light ................................................... 6
4.2.4 Adjustment of Detector Well for analyzing the transmitted light
(Chromogenic and Immunoassy)............................................................................................... 8
4.2.5 Exit Adjustment .......................................................................................................................... 9
4.2.6 Target Value List for Adjustment ............................................................................................... 9
4.3 Mechanical System Adjustment............................................................................................................ 10
4.3.1 Required Tools for Adjustment ................................................................................................ 10
4.3.2 How to Enter the Mechanical System Position Adjustment Mode ........................................... 10
4.3.3 The Mechanical System Position Adjustment Screen ............................................................. 11
4.3.4 Position Adjustment Procedure of Pipette (“[1]blood 1”, “[2]blood 10”, and “[3]blood_stat”) ... 13
4.3.5 Position Adjustment Procedure of Pipette (“[4]reag 1”) (“[5]reag 9”) (“[6]reag 10”) ................. 16
4.3.6 Position Adjustment Procedure of Pipette (“[7]reag_rinse”) (“[8] buffer”) ................................ 17
8
4.3.8 Position Adjustment Procedure of Pipette (“[11]p_tube 1)....................................................... 21
4.3.7 Position Adjustment Procedure of Pipette (“[10]wash_o) ........................................................ 19
4.3.9 Position Adjustment Procedure of Catcher (“[17]c_tube 1) ..................................................... 22
4.3.10 Position Adjustment Procedure of Catcher (“[23]warm 1) ....................................................... 24
4.3.11 Position Adjustment Procedure of Catcher (“[27]shake) ......................................................... 26
4.3.12 Position Adjustment Procedure of Catcher (“[28]dust) ............................................................ 27
4.3.13 Position Adjustment Procedure of Catcher (“[29]immunoassy)............................................... 28
4.3.14 Output Setting Values .............................................................................................................. 29
4.4 Temperature Adjustment ...................................................................................................................... 30
4.4.1 Temperature Control Summary ...............................................................................................30
4.4.2 Temperature Verification at Each Unit 4 ................................................................................ 30
4.4.3 Temperature Adjustment Procedures 4 .................................................................................31
4.5 Electrical Adjustment ............................................................................................................................32
4.5.1 PCB No. 6362: MAIN (CPU, I/O, Motor Control, Temperature Control, A/D) .......................... 32
PCB No. 6373: MAIN-2 (CPU, I/O, Motor Control, Temperature Control, A/D)....................... 32
4.5.2 PCB No. 4086: PS (Power Source, Motor Driver) ................................................................... 34
CA-500 Series S/M Revised December 2001
To Next Page
Loading...
