5) Normotest (NT) [second]
Calculated Parameters:
(a) Activation Percent [%]
(b) INR (for European and UK specification only) [ – ]
6) Thrombin Time (for export specifications only) [second]
7) Factor (II, V, VII, VIII, IX, X, XI, XII) [second]
Calculated Parameters:
(a) Activation Percent [%]
8) Protein C Coagulum (PCc) [second]
Calculated Parameters:
(a) Activation Percent [%]
(9) Batroxithonbin (BXT) [second]
(10) LA1, LA2 [second]
[Options]
(11) Anti-thrombin III (AT-III) [%]
(12) α2 Anti-plasmin (APL) [%]
(13) Anti-plasminogen (Plg) [%]
(14) Protein C (PC) [%]
(15) Heparin (Hep) [%]
International Unit [IU/mL]
(16) FDP (SFDP) [µg/mL]
(17) Plasma FDP (PFDP) [µg/mL]
(18) D-Dimer (DPI/DD) [g/mL] [µg/mL]
(2) Measurement Ranges
1) Fbg
Measuring is possible from 25 mg/dL to 1000 mg/dL of the fibrinogen concentration.
(In case of 450 mg/dL or above, measurement is performed with automatic re-dilution in high Fbg
concentration mode, and in case of 50 mg/dL or less, in low Fbg concentration mode. In CA-550 and
CA-560, measurement for 900 mg/dL or above is performed in high Fbg concentration mode, and for
100 mg/dL or less, in low Fbg concentration mode. )
2) D-Dimer (CA-550 and CA-560 only)
With applicable reagents, measuring is possible from 50 to 9999 µ/gL. However, the concentration of
2000 µ/gL or above is measureed in 8-hold dilution mode (+D-Dimer).
3) Serum FDP(CA-550 and CA-560 only)
With applicable reagents, measuring is possible from 2.5 to 320 µg/mL . However, the concentration
of 40 µg/mL or above is measureed in 8-hold dilution mode (+PFC).
4) Plasma FDP (CA-550 and CA-560 only)
With applicable reagents, measuring is possible from 2.5 to 480 µg/mL. However, in the concentration
of 60 µg/mL or above, measurement is performed in 8-hold dilution mode (+PFC).
CA-500 Series S/M 1-4 Revised December 2001 8
To Next Page
Loading...
