Terex Fuchs MHL380 D User Manual

DISPLAY AND CONTROL ELEMENTS 4
MHL380 D 4.41
4.7.5 Charge air temperature
Temp. (°C)
Actions
Above 80
Start of the warning levels
Warning buzzer sounds at intervals
of one second
Indicator (68/35) and following text
issued (68/47): "CHARGE AIR"
"TEMPERATURE"
After a brief
delay
Reduction of diesel engine output
according to temperature by up to
70%. Indicator (68/68) flashes.
Above 85
Continuous warning buzzer
Indicator (68/46) and following text
issued (68/47): "WORK
HYDRAULICS" "DISABLED"
Disable the travel and work func-
tions
Start up at the upper idle speed
Below 76
Warning levels are reset
Travel and work functions enabled
again
Optical and acoustic warnings can-
celled again
Below 66
Engine output enabled again
Measures to be taken when a warning oc-
curs
►
Switch off the diesel engine as quickly as
possible.
►
Check the water/charge cooler for contam-
ination. Clean if necessary.
►
If the warning message persists, call for
service personnel.
MHL-NBXX-631
68
46
47
35
Fig. 68 Monitoring the charge air temperature
35 Charge air temperature indicator
46 Travel and work functions disabled indicator
47 Text output for the indicator displays
68 Engine control system fault display

Terex Fuchs MHL380 D Specifications

General

Brand	Terex
Model	Fuchs MHL380 D
Category	Construction Equipment
Language	English