Terex Fuchs MHL380 D User Manual

4 DISPLAY AND CONTROL ELEMENTS
4.62 MHL380 D
4.10.11 Windshield wiper/Intermittent wip-
ing
ATTENTION
The windshield wiper only works if the wind-
shield is closed.
In the function menu, the switching function
"Windscreen wiper/intermittent wiping (upper
window section)" (99/102) or "Windscreen
wiper (lower section)" (99/108) (option) is dis-
played in the form of a pictogram.
The windscreen wiper is switched on in the
function menu with a single short click with the
multifunction button (99/21) when the symbol
is "in focus".
The windscreen wiper is switched off again
with another single short click with the multi-
function button (99/21).
The interval for windscreen wiper movement
can be adjusted in the main window using the
menu selection wheel on the display. It can be
set between 3 and 15 seconds at intervals of
1 second. The set wiper movement interval is
displayed in the symbol (99/102) for the main
windscreen wiper. A wiper movement interval
of "0" means that the windscreen wiper is
working continuously.
The interval for wiper movement can only be
adjusted if the focus has been navigated to
the windscreen wiper symbol using the multi-
function button. If the focus has been moved
to the windscreen wiper symbol in the function
menu using the menu selection wheel, the
interval for wiper movement will be reset to
"0".
After the ignition is switched off, the set inter-
val for wiper movement remains saved.
102
21
108
MHL-NBXX-589
Fig. 99 Windshield wiper/intermittent wiping

Terex Fuchs MHL380 D Specifications

General

Brand	Terex
Model	Fuchs MHL380 D
Category	Construction Equipment
Language	English