TECHNICAL DATA 3
MHL380 D 3.5
3.3 Diesel engine
Manufacturer and model Deutz TCD 2015 L06 4V
Design 6-cylinder V engine
Control Electronic Engine Control (EEC III)
Direct fuel injection with pump/line/nozzle,
turbocharger, charge cooling
Engine power 273 kW
Rated speed 1800 U/min
Stroke displacement 11.91 l
Cooling system Water and charge air cooling with tempera-
ture-controlled fan speed
Emission standard COM III and EPA Tier III
Specific fuel consumption 202 g/kWh at 100 % nominal output
Air cleaner type Two-stage filter with relief valve
3.4 Electrical system
Operating voltage 24 V
Battery 2 x 12 V / 143 Ah / 950 A (according to EN)
Alternator 28 V / 80 A
Starter 24 V / 5.4 kW
Cold start auxiliary device 2 x flame glow plug
Lighting system 1 x H3 headlamp at dipperstick
1 x H3 headlamp on uppercarriage,
1 x H3 headlamp on cab floor,
Limiting lights and flashers
Option of up to 8 x working floodlights (dipper
stick, boom, at the front of the cab roof, at the
rear of the cab roof)
All working headlamps are available in H3 or
in XENON.
System for operation with magnetic plate 30 kW three-phase alternator DC generator
with control unit driven directly by diesel en-
gine via V-belts. The generator is equipped
with a dust protection filter and an overheating
display.
To Next Page
Loading...
Need help?
General
