Terex Fuchs MHL380 D User Manual

SAFETY AND ACCIDENT PREVENTION 2
MHL380 D 2.19
2.3.8 Hydroaccumulators
 All work on hydroaccumulators must be
performed by trained specialist personnel
only.
 Unsuitable mounting and handling of
hydroaccumulators can result in serious
accidents.
 Do not put damaged hydroaccumulators into
operation.
 Before working on a hydroaccumulator,
reduce the pressure in the hydraulic system
as described in these operating instructions.
 Do not weld or solder onto the
hydroaccumulator and do not perform any
mechanical work. The hydroaccumulator can
be damaged by the effects of heat and can
burst due to mechanical processing.
DANGER OF EXPLOSION!
 Only specialist personnel are permitted to fill
the hydroaccumulator with nitrogen. Using
oxygen or air will result in DANGER OF
EXPLOSION!
 The body of the accumulator may become
hot during operation, resulting in a risk of
burns.
 New hydroaccumulators must be filled with
the necessary pressure for the intended
purpose prior to putting the machine into
operation.
 Operating data (minimum and maximum
pressure) must be constantly indicated on
the hydroaccumulators. The indicator must
remain permanently visible.

Terex Fuchs MHL380 D Specifications

General

Brand	Terex
Model	Fuchs MHL380 D
Category	Construction Equipment
Language	English