Terex Fuchs MHL380 D User Manual

4 DISPLAY AND CONTROL ELEMENTS
4.60 MHL380 D
4.10.6 Cab door
j WARNING
Serious injury due to falling
• Only open the cab door for enter-
ing and leaving. Ensure that the
cab door is closed while working,
adjusting and traveling with the
cab.
• An open cab door can swing. Pri-
or to entering and leaving, ensure
that the cab door is supported by
the locking device.
In an emergency: Administer first
aid, seek treatment from a doctor
ATTENTION
To ensure that the door can be opened in all
weather conditions, the door seals must be
brushed with talcum or silicone oil at least every
two months or more frequently if required.
Grease the door hinges and door locks regular-
ly. It is essential to wear safety goggles and
suitable protective clothing during maintenance
work.
Opening the cab door
►
Push the handle (94/1) up and open the
cab door.
►
Swing the cab door until the latch (95/1) is
secured in the latching device (95/2).
Closing the cab door
►
The cab door is unlocked with the lever
(94/2).
4.10.7 Side window
The front and rear side window can be
opened in various positions.
►
Slide locking device (961) upwards.
►
Use the handle (96/1) to slide the side win-
dow to the desired catch (96/2).
►
Snap in locking device (96/3).
MHL-NBXX-333
1
2
Fig. 94 Opening the cab door
MHL-NBXX-334
1 2
Fig. 95 Locking the cab door
MHL-XXXX-309
12
3
Fig. 96 Opening the side window
4.10.6
Cab
door

Terex Fuchs MHL380 D Specifications

General

Brand	Terex
Model	Fuchs MHL380 D
Category	Construction Equipment
Language	English