Terex Fuchs MHL380 D User Manual

7 CARE AND MAINTENANCE
7.44 MHL380 D
7.9.2.3 Replacing the fuel filter
h Replace as described in Chapter 7.8.3
Maintenance and inspection plan
►
Remove cover plate (192/1) in mainte-
nance process.
►
Place a suitable container under the fuel
filters (191/1).
►
Clean the outside of the fuel filter cartridg-
es (191/1).
►
Unscrew the filter cartridges (using a tight-
ening strap wrench if necessary).
►
Collect the fuel and dispose of filter car-
tridges according to regulations.
►
Clean the filter heads and check their con-
dition.
►
Wet the seals or fuel filter cartridges with
oil or diesel fuel.
►
Screw on the new fuel filter cartridges and
tighten firmly by hand.
►
With one more half turn, tighten the fuel
filter cartridges.
►
Refit cover plate (192/1) in maintenance
process.
ATTENTION
There is no need to vent the fuel system.
►
After a trial run, check the fuel filter for
leaks.
2
380-101-101
Fig. 191 Fuel filter
1
380-101-098
Fig. 192 Cover plate

Terex Fuchs MHL380 D Specifications

General

Brand	Terex
Model	Fuchs MHL380 D
Category	Construction Equipment
Language	English