To Next Page

To Previous Page

SAFETY AND ACCIDENT PREVENTION 2

MHL380 D 2.11

2.2.10 Hoisting (optional)

If the loading machine is to be put into hoisting

operation, the safety equipment prescribed by

national law must be present and in full

working order. According to EC Machinery

Directive 2006/42/EC and DIN EN 474-

5:2006+A2:2012, the following are required:

 Overload warning device

 Hose-rupture safety valves on lift cylinders

 Hose-rupture safety valves on dipperstick

cylinders

 Carrying capacity table in the cab (included

in the operating instructions)

 Suitable attachment (load hooks should be

used for loading machine MHL380 D)

2.2.11 Residual risk

Even when used as intended in compliance

with all instructions provided, a residual risk

cannot be ruled out. As such, misuse or

technical defects may cause substantial

damage to property and a risk of personal

injury, including severe injuries or even death.

These residual risks can be kept to a

minimum by handling the machine carefully

and competently. They cannot, however, be

fully eliminated.

2.2.10

Hoistin

(option

al)

Terex Fuchs MHL380 D User Manual

Questions and Answers: