DISPLAY AND CONTROL ELEMENTS 4
MHL380 D 4.57
4.10 Cab
4.10.1 Safety
The structural design of the cab provides a
high degree of safety. It cannot however
guarantee complete protection.
Operating staff are responsible for ensuring
that they buckle themselves in, observe the
safe working loads, operate the machine only
on solid, level ground, and move the loading
machine in such a way that no hazardous
situations arise.
Additional safety measures are required if
material to be loaded can fall in the area of
the cab or if a toppling loading machine can
roll over the cab due to slopes in the terrain.
Damage may impair the structural safety of the
cab. Damaged cab parts may only be replaced
by original parts from the machine manufacturer.
Damage to the steel structure (cracks, buckles,
distortion) must not be repaired. The cab should
be replaced with an original cab from the ma-
chine manufacturer.
4.10.2 Handles
Handles in the cab are arranged such that
anyone entering or leaving the cab can hold
on at three points.
â–º
Use the handles (88/1-4) when entering
and exiting.
â–º
The cab door must only be opened and
closed from the driver's seat. First, use the
upper part of the handle (88/4) and then
the handle (88/5).
h Chapter 2.5 Cab which can be raised and
moved forwards
Fig. 88 Handles
To Next Page
Loading...
Need help?
General
