CARE AND MAINTENANCE 7
MHL380 D 7.33
7.8 Monitoring, maintenance and inspection plans
7.8.1 Initial inspection (delivery inspection)
Work to be performed by trained dealer or service personnel:
Check whether machine-specific operating instructions are available in the ma-
chine.
2 Check the engine oil level 7.9.1.1
3 Checking the coolant level 7.6.3
4 Checking hydraulic oil level 7.6.4
5 Check the fuel level. 7.6.2
6 Check the oil levels in the axles, wheel hubs, swing gear and drive transmission 7.6.7
7 Check the condition of the tires and the wheel nut fastenings. 7.6.6
8 Check the filling level and charge of the batteries. 7.6.8.1
9 Fill the windscreen washwipe system. 4.10.12
10 Lubricate the machine (all lubricating points). 7.7
11 Perform a test run, a functional test of the hydraulic system and a test job. —
12 Perform a visual inspection for leaks on all lines, hoses, cylinders, etc. —
13 Check the function of electrical indicating and warning elements, as well as lighting. 7.6.8
14 Initial handover card and return to manufacturer. 7.1
To Next Page
Loading...
Need help?
General
