WORK OPERATION 5
MHL380 D 5.1
5 Work operation
Danger of injury due to restrict-
ed visibility
• Before and during the work oper-
ation, check that there are no
people or obstacles in the danger
zone.
• Warn persons in the vicinity of
the danger zone by sounding the
horn.
• Observe all safety notes.
In an emergency: Administer first
aid, seek treatment from a doctor
h Chapter 2 in particular 2.2.3 Safe
operation despite obscured view
5.1 Controls
Check which type of control unit the machine
is equipped with. There is a sign (124/1) in
the cab indicating the most important con-
trols. The drawing number (125/1) indicates
the control type shown.
If the customer so wishes, the loading ma-
chine may be equipped with a special control.
h Additional operating instructions
Risk of injury due to incorrect
operation
• At a low engine speed, check
whether the machine movements
correspond to the sign.
• Start at low engine speed when
familiarizing yourself with the
controls and slowly increase this.
In an emergency: Administer first
aid, seek treatment from a doctor
Fig. 124 Location of control sign
Fig. 125 Control sign (example)
Control
To Next Page
Loading...
Need help?
General
