Terex Fuchs MHL380 D User Manual

2 SAFETY AND ACCIDENT PREVENTION
2.4 MHL380 D
2.2.2 Avoiding fire and explosion
 Turn the diesel engine off when refueling.
 Check the electrical system regularly.
 Have all faults such as loose connections,
blown fuses and bulbs, or singed or worn
away wiring repaired by specialist personnel
immediately.
 When refueling or charging the batteries,
avoid smoking and naked flames.
 Always start the diesel engine according to
the directions in the operating instructions.
 Do not take any flammable liquids on the
machine, except in tanks provided for that
purpose.
 Check all lines, hoses and screw couplings
regularly for leaks and damage. Repair all
leaks immediately and replace any defective
parts. Oil spraying out of leaks can easily
lead to fire.
 Check that all supports and protective signs
have been installed properly so as to
withstand vibrations, abrasion and heat
build-up.
 Do not use jump starters containing ether to
start diesel engines with preglow or flame-
glow systems! Otherwise there is a
DANGER OF EXPLOSION!
 You should familiarize yourself with where
the (optional) fire extinguishers are located
on the machine and how to use them, as
well as with on-site options for reporting and
fighting fires.
2.2.3 Safe operation despite obscured
view
Depending on the position of the cab lift and
loading equipment as well as the area behind
the counterweight, the driver may have a
restricted field of vision. He or she will not
therefore always be able to see people and
obstacles in the close vicinity of the machine.
To avoid injuring persons and machine
collisions, the driver must take the following
actions before starting and when operating the
machine:
 Set the outside mirror to optimum visibility.
 Rear view camera function test.
h Chapter 4.13.1 Rear view camera
(optional)
 Vehicle reversing alarm function test
(optional). A pulsed alarm must sound
during travel.
 Mark the machine's work zone using barrier
tape.
 Ensure that there are no people or obstacles
in the danger zone. Observe field of vision
and visual aids during operation.
 Activate the horn before starting the engine.
 Before driving the machine, move the cab lift
and loading equipment into a position
offering optimum visibility.
 Activate the horn before driving the machine.
 When driving the machine in an area where
visibility is poor, a second person must be
deployed to offer guidance and protection.
Modifications to the machine undertaken by
the operator must not limit the driver's
visibility.
2.2.3
Safe
operati
on
despite
obscur
ed view

Terex Fuchs MHL380 D Specifications

General

Brand	Terex
Model	Fuchs MHL380 D
Category	Construction Equipment
Language	English