Terex Fuchs MHL380 D User Manual

7 CARE AND MAINTENANCE
7.70 MHL380 D
7.9.14 Changing axle and transmission oil
h Filling quantities, oil quality, and oil change
intervals: chapter
66H3.15 67HFuels, lubricants
and coolants, chapter 7.8.3 Maintenance
and inspection plan, chapter 7.2 Regular oil
analyses
The axle oil must be changed at operating
temperature.
ATTENTION
Collect old oil with a suitable reser-
voir. Do not allow them to seep into
the ground or water! Give to an au-
thorized waste disposal company to
dispose of in an environmentally-
friendly manner.
ATTENTION
After filling the axles with oil, move the machine
for approx. 5 minutes in order to ensure that the
oil is distributed. Check the oil level again and
top up if necessary.

Terex Fuchs MHL380 D Specifications

General

Brand	Terex
Model	Fuchs MHL380 D
Category	Construction Equipment
Language	English