Terex Fuchs MHL380 D User Manual

SAFETY AND ACCIDENT PREVENTION 2
MHL380 D 2.5
2.2.4 Putting the machine into operation
safely
 Before putting the machine into operation,
always perform a thorough walk-around
inspection of the machine.
 Check the machine for loose pins, tears,
wear, leaks and deliberate damage.
 Never put a damaged machine into
operation.
 Have the damage made good immediately.
 Make sure that all hoods and covers are
closed, but locks are not closed off.
 Check that all safety signs are present.
 Check that the windows and the inside and
outside mirrors are clean. Secure doors and
windows against inadvertent movements.
 Make sure that no-one is working on or
under the machine and warn any persons
standing nearby by pressing the horn before
putting the machine into operation.
 Before putting the machine into operation,
adjust the operator's seat, the mirror and the
operating levers so you can work
comfortably and safely.
 Follow the applicable regulations for the site
you are working on.
 Never put the machine into operation without
the cab.
2.2.5 Starting the machine safely
 Before starting, check all indicator lamps
and instruments to make certain they are
working properly, move all operating levers
to the neutral position and fold the left
armrest down.
 After starting the diesel engine, give a short
blast of the horn to warn persons who are in
the vicinity of the machine.
 Only start the machine from the operator's
seat.
 Unless there are instructions to the contrary,
start the diesel engine as described in the
operating instructions.
 Only allow the diesel engine to run in
enclosed rooms if there is adequate
ventilation. If necessary, open doors and
windows to ensure a proper supply of fresh
air.
 Bring the diesel engine and hydraulic fluid
up to operating temperature. Low oil
temperatures cause the control system to
respond sluggishly.
 Check the loading equipment control unit to
ensure it is working properly.
 Carefully move the machine to open terrain
and then check all safety-relevant functions.
2.2.4
Putting
the
machin
e into
operati
on
safely
2.2.5
Starting
the
machin
e safely

Terex Fuchs MHL380 D Specifications

General

Brand	Terex
Model	Fuchs MHL380 D
Category	Construction Equipment
Language	English