4 DISPLAY AND CONTROL ELEMENTS
4.80 MHL380 D
4.13.2 Stopping
The speed of travel is reduced by releasing
the travel pedals (114/17) and (114/18). The
hydrostatic travel drive acts as a non-wearing
service brake.
h Chapter 4.13.3 Brakes
4.13.3 Brakes
â–º
Service brake (can be locked in place)
Apply the service brake (114/16) as re-
quired. When the service brake is locked in
place, check that the brake pressure di-
minishes after the diesel engine has
been stopped for some time.
â–º
Parking brake
Switch on the parking brake pushbutton
(114/65) when parking the machine.
Danger of injury due to unse-
cured loading machine
• With the exception of emergency
braking, do not engage the park-
ing brake unless the machine is
stopped.
4.13.4 Steering
The machine has a hydraulic front axle.
j
Danger of injury due to uncon-
trollable driving statuses
• In the event of steering malfunc-
tions, stop work immediately,
identify the cause (see Trouble-
shooting) and contact a service
engineer if necessary.
In an emergency: Administer first
aid, seek treatment from a doctor
To Next Page
Loading...
Need help?
General
