Terex Fuchs MHL380 D User Manual

TECHNICAL DATA 3
MHL380 D 3.11
3.13.2 Provisional carrying capacity table (18.5 m loading equipment)
The carrying capacity values are stated in metric tons (t). The pump pressure is 360 bar. The val-
ues represent 75% of the static tipping load or 87% of the hydraulic lifting force (marked ), in ac-
cordance with ISO 10567. On solid and level ground, the values apply to a swing range of 360°.
The (...) values apply in the longitudinal direction of the undercarriage. The values for "not sup-
ported" apply when the load is hoisted above the steering axle or the locked oscillating axle.
ATTENTION
The weight of the attached hoisting equipment (grab, load hook, etc.) must be deducted from the carrying
capacity values. The safe working load of the hoisting equipment must be observed.
In accordance with EU Standard EN 474-5, hose-rupture safety devices on the lift and dipperstick
cylinders, an overload warning device, and a carrying capacity table in the cab are required for
hoisting. Only hoist when the machine's outriggers are up.
Work equipment: boom 9.6 m, dipperstick 8.0 m
Height
Undercarriage
Reach in m
m
Outrigger
6
7.5
9
10.5
12
13.5
15
16.5
18
18
not supported
(9.3°)
4-pt supported
9.3° (9.3°)
16.5
not supported
(10.0°)
4-pt supported 10.0° (10.0°)
15
not supported
(11.7)
(9.3)
4-pt supported
12.1° (12.1°)
10.0° (10.0°)
13.5
not supported
(11.8°)
(9.5)
(7.7)
4-pt supported
11.8° (11.8°)
11.1° (11.1°)
9.6° (9.6°)
12
not supported
(11.8°)
(9.5)
(7.7)
(6.3)
4-pt supported 11.8° (11.8°) 11.0° (11.0°) 10.4° (10.4°) 8.6° (8.6°)
10.5
not supported
(11.8)
(9.4)
(7.7)
(6.3)
(5.2)
4-pt supported
12.0° (12.0°)
11.2° (11.2°)
10.4° (10.4°)
9.7° (9.7°)
6.5° (6.5°)
9
not supported
(11.6)
(9.3)
(7.6)
(6.3)
(5.2)
4-pt supported
12.4° (12.4°)
11.4° (11.4°)
10.6° (10.6°)
9.7 (9.9°)
8.2 (8.7°)
7.5
not supported
(14.4)
(11.2)
(9.0)
(7.4)
(6.2)
(5.2)
4-pt supported
14.6° (14.6°)
13.1° (13.1°)
11.9° (11.9°)
10.9° (10.9°)
9.6 (10.0°)
8.1 (9.3°)
6
not supported
(18.3)
(13.7)
(10.8)
(8.7)
(7.2)
(6.0)
(5.1)
(4.3)
4-pt supported
18.6° (18.6°)
15.9° (15.9°)
13.9° (13.9°)
12.4° (12.4°)
11.1° (11.1°)
9.4 (10.2°)
8.1 (9.3°)
6.5° (6.5°)
4.5
not supported
(24.1)
(17.1)
(13.0)
(10.3)
(8.4)
(7.0)
(5.9)
(5.0)
(4.3)
4-pt supported 27.1° (27.1°) 21.0° (21.0°) 17.2° (17.2°) 14.7° (14.7°) 12.9° (12.9°) 10.9 (11.5°) 9.2 (10.4°) 7.9 (9.4°) 6.9 (7.6°)
3
not supported
(21.6)
(15.7)
(12.2)
(9.8)
(8.0)
(6.7)
(5.7)
(4.9)
(4.2)
4-pt supported
31.2° (31.2°)
23.1° (23.1°)
18.5° (18.5°)
15.4° (15.4°)
12.6 (13.4°)
10.6 (11.8°)
9.1 (10.5°)
7.8 (9.4°)
6.9 (8.2°)
1.5
not supported
(14.5°)
(14.6)
(11.4)
(9.3)
(7.7)
(6.5)
(5.6)
(4.8)
(4.2)
4-pt supported
14.5° (14.5°)
24.5° (24.5°)
18.6 (19.4°)
14.9 (16.1°)
12.3 (13.8°)
10.3 (12.0°)
8.9 (10.6°)
7.7 (9.2°)
6.8 (8.1°)
0
not supported
(11.3°)
(13.8)
(10.9)
(8.9)
(7.4)
(6.3)
(5.4)
(4.7)
(4.2)
4-pt supported 11.3° (11.3°) 23.6 (24.6°) 18.0 (19.8°) 14.4 (16.4°) 12.0 (13.9°) 10.1 (12.0°) 8.7 (10.5°) 7.6 (9.1°) 6.8 (7.5°)
-1.5
not supported
(11.2°)
(13.4)
(10.5)
(8.6)
(7.2)
(6.1)
(5.3)
(4.7)
4-pt supported
11.2° (11.2°)
19.8° (19.8°)
17.6 (19.6°)
14.1 (16.2°)
11.7 (13.7°)
10.0 (11.8°)
8.6 (10.1°)
7.6 (8.6°)
-3
not supported
(12.0°)
(13.2)
(10.3)
(8.4)
(7.1)
(6.1)
(5.3)
(4.7)
4-pt supported
12.0° (12.0°)
18.7° (18.7°)
17.3 (18.6°)
13.9 (15.5°)
11.6 (13.1°)
9.9 (11.2°)
8.6 (9.5°)
7.6 (7.8°)
-4.5
not supported
(13.2)
(10.3)
(8.4)
(7.0)
(6.0)
(5.3)
4-pt supported
19.0° (19.0°)
17.0° (17.0°)
13.9 (14.3°)
11.5 (12.1°)
9.9 (10.2°)
8.4° (8.4°)
Fig. 10 Provisional carrying capacity table (18.5 m loading equipment)

Terex Fuchs MHL380 D Specifications

General

Brand	Terex
Model	Fuchs MHL380 D
Category	Construction Equipment
Language	English