Terex Fuchs MHL380 D User Manual

3 TECHNICAL DATA
3.28 MHL380 D
3.15.3 Alternative recommendations for
other temperature ranges
The ambient temperature is decisive when
selecting the right hydraulic fluid. The temper-
ature ranges listed in the graphic are approx-
imate guides. Values above or below these
limits are acceptable for short periods.
3.15.4 Biodegradable hydraulic fluid
PANOLIN HLP SYNTH 46
We recommend biodegradable hydraulic flu-
ids based on synthetic ester as an alternative
to mineral oils. The same viscosity limit values
apply as for mineral oils.
ATTENTION
When changing from mineral to
biodegradable hydraulic fluid, the
tank and the hydraulic system must
be completely drained, cleaned
and flushed. Warranty conditions
as well as the changeover guide-
line from KLEENOIL PANOLIN AG
should be complied with.
Ester-based biodegradable hydrau-
lic fluids must not be mixed with
oils from different manufacturers or
with mineral oil. Doing so may
cause aggressive reactions which
in turn could damage the hydraulic
system.
Before changing oils, please ask your local
TEREX | Fuchs dealer for advice.
Vegetable-based oils are not permitted be-
cause of their unsuitable temperature re-
sistance.
RENOLIN XTREME TEMP 46
RENOLIN B15
PANOLIN HLP SYNTH 46
BSB50509
Fig. 21 Ambient temperature of hydraulic oil
21

Terex Fuchs MHL380 D Specifications

General

Brand	Terex
Model	Fuchs MHL380 D
Category	Construction Equipment
Language	English