Terex Fuchs MHL380 D User Manual

2 SAFETY AND ACCIDENT PREVENTION
2.2 MHL380 D
2.2 General safety notes
 Familiarize yourself with the operating
instructions before the machine is put into
operation for the first time. Make sure that
you have any additional manuals in your
possession and have read and understood
them (these may be related to special
equipment on your machine).
 Only persons explicitly authorized to do so
may operate, maintain or repair the
machine. All such persons must be of the
legal minimum age.
 Only trained personnel or those who have
undergone proper instruction may be
deployed. Personnel responsibilities for
operating, fitting, maintaining and repairing
the machine must be clearly defined.
Authorize your personnel to ignore third-
party instructions that contravene health and
safety. This also applies with regard to
instructions contravening traffic regulations.
 Personnel who are being trained, instructed
or are involved in a general training program
must only be allowed to work with the
machine under the supervision of an
experienced person.
 Make checks at regular intervals to ensure
personnel are working in a safety-conscious
manner in compliance with the operating
instructions.
 Wear protective work clothing when you are
working on or with the machine. Rings,
wristwatches, ties, shawls, open jackets or
any other loose clothing should not be worn.
Otherwise there is a danger that clothing
may become stuck or caught in the machine.
Protective goggles, protective boots,
helmets, gloves, reflective jackets, ear
protection, etc. may be required for certain
tasks.
 Ask the site supervisor about special safety
requirements.
 Always fold up the left armrest before getting
out of the operator's seat.
 When getting in and out, do not hold onto
the steering column, the operator control
panel or the operating levers. This could
cause inadvertent movements that could
result in accidents.
 Never jump off the machine. Instead use the
steps, ladders, and hand grips designed for
mounting and descending. Grab on with
both hands and face the machine.
 The rear windshield acts as an emergency
exit.
 For maintenance and repair jobs, observe
the following points as described in these
operating instructions:
- park the machine only on a solid and level
surface,
- set down the open work attachment
carefully on the ground,
- release the pressure in the hydraulic
system,
h Chapter 7.3 Discharging residual
pressure in the hydraulic circuit
- move all operating levers to the neutral
position and fold up the left armrest,
- turn off the diesel engine and remove the
ignition key.
 Before any work takes place on the
hydraulic circuit, the pressure in the
hydraulic system and inside the tank must
also be released as described in these
operating instructions.
 Secure all loose parts on the machine.
 Never put the machine into operation without
having first performed a thorough walk-
around inspection and checking whether any
safety signs are missing or illegible.
 The manufacturer's approval must be
obtained before making any changes,
additions or conversions to the machine that
could impair safety. This also applies to the
installation and adjustment of safety devices
and safety relief valves, as well as to any
welding work on load-bearing elements.
2.2
Genera
l safety
notes

Terex Fuchs MHL380 D Specifications

General

Brand	Terex
Model	Fuchs MHL380 D
Category	Construction Equipment
Language	English