4 DISPLAY AND CONTROL ELEMENTS
4.68 MHL380 D
4.11.5 Positioning the cab
The cab can be variably moved hydraulically.
Danger of injury due to falling
• When the cab is being adjusted,
and during driving and working,
the left-hand armrest must be
folded down, the cab door shut
and the safety belt fastened.
In an emergency: Administer first
aid, seek treatment from a doctor
As long as the "Raise/lower cab" function is ac-
tive, the engine speed will be increased auto-
matically to 70% of nominal speed if the prese-
lected speed is less than 70% of nominal speed.
Adjust the cab height as follows:
The cab can be raised/lowered in two ways:
â–º
By pressing and holding down the pushbut-
ton (105/63) until the cab reaches the de-
sired working height.
â–º
Pressing and holding down the pushbutton
(105/61) lowers the cab.
Alternatively, in the function menu, where the
"Raise cab" (105/120) or "Lower cab"
(105/121) function is displayed in the form of
a pictogram.
The cab is raised or lowered when the respec-
tive symbol is "in focus" and the multifunction
button (105/21) is pressed and held down.
Alternatively, it is possible to "raise/lower" the
cab by pressing and holding down the F3/F4
keys.
120
MHL-NBXX-590
121
63
61
21
10
118 119
8262
Fig. 105 Positioning the cab
To Next Page
Loading...
Need help?
General
