7 CARE AND MAINTENANCE
7.16 MHL380 D
7.6.6 Tires
Danger of injury due to machine
movements
• Repair work on the wheels, for
example dismantling tires from
the rim or fitting them onto the
rim, may only be performed by
specialists and with suitable as-
sembly tools.
• When working on the tires make
sure that the machine is parked
safely and has been secured
against rolling away (chocks)!
In an emergency: Administer first
aid, seek treatment from a doctor
Checking the condition of the wheels
â–º
Check the tires for tears, cuts, foreign bod-
ies, etc.
â–º
During the first 50 operating hours, check
the torque of the wheel nuts weekly, and
subsequently at regular intervals, tighten-
ing to the correct torque if necessary.
Tightening torque: 650 Nm
When changing a wheel, always tighten the
wheel nuts to the specified torque crosswise
in several stages.
To Next Page
Loading...
Need help?
General
