Terex Fuchs MHL380 D User Manual

CARE AND MAINTENANCE 7
MHL380 D 7.41
7.9.1.3 Changing the engine oil filter
The engine oil filter must be replaced every
time the engine oil is changed:
►
Remove cover plate (188/1) in mainte-
nance process.
►
Place a suitable container under the engine
oil filter.
►
Clean the outside of the engine oil filter
cartridge (187/1).
►
Loosen and unscrew the filter cartridge
(187/1) using a standard tool. Check that
the fastening stud is located securely in the
filter head.
►
Dispose of the filter cartridge (187/1) ac-
cording to regulations.
►
Check the condition of the filter head and
clean.
►
Fill the new filter with oil. Wet the sealing
ring with oil and tighten firmly by hand until
the seal is securely in place.
►
With one more half turn, tighten the filter
cartridge.
►
Refit cover plate (188/1) in maintenance
process.
►
Only start the engine if it contains suffi-
cient oil.
h Chapter 7.9.1.1 Checking the engine oil
level
►
After a trial run, check the engine oil filter
for leaks.
2
380-101-098
Fig. 187 Engine oil filter
1
380-101-098
Fig. 188 Cover plate

Terex Fuchs MHL380 D Specifications

General

Brand	Terex
Model	Fuchs MHL380 D
Category	Construction Equipment
Language	English