Terex Fuchs MHL380 D User Manual

3 TECHNICAL DATA
3.26 MHL380 D
3.15.2 Specifications for fuels, lubricants and coolants
Specified fuels, lubricants and coolants for Central Europe
Application
Designation
Recommended product
Specification, standards, quality
Engine
Diesel fuel
Use of branded fuels with
a sulfur content of <
0.05%.
A higher sulfur content
will affect the oil change
intervals and service life
of the engine.
DIN EN 590
ASTM D 975-88; 1-D/2-D
Before using RME fuels (rape oil
methyl ester), it is essential that
you consult your responsible
TEREX | Fuchs dealer for further
details.
Engine
Engine oil
Titan Cargo MC 10W-40
DQC III
ACEA-E4-99/E6-04
See also engine manufacturer’s
operating instructions
Cooling for engine Coolant Fricofin-35 BASF G 48
Clean water and antifreeze based
on ethylene glycol
See also engine manufacturer’s
operating instructions
Hydraulic
working circuits
Hydraulic fluid
or hydraulic
multigrade oil
Renolin B 15
or
Renolin Xtrem
HLP or HVLP ISO VG 46
The following viscosity limit values
must be observed (according to
ASTM 445):
at 100°C min. 7.0 mm²/s (cSt)
at -10°C < 1300 mm²/s (cSt)
Biodegradable
hydraulic fluid
on based on
synthetic ester
PANOLIN
HLP SYNTH 46
(Brand label on machine.)
HEES ISO VG 46
Filling according to customer speci-
fications. Brand label on machine.
Do not mix biodegradable oils from
different manufacturers.
The same viscosity specifications
apply as for mineral hydraulic flu-
ids.
When changing from mineral to
biodegradable hydraulic fluid, the
tank and the hydraulic system must
be completely drained, cleaned and
flushed.
Before changing oils, please ask
your local TEREX | Fuchs dealer
for advice.
68H
3.15.2
69HSpecific
ations
for
fuels,
lubrican
ts and
coolant
s

Terex Fuchs MHL380 D Specifications

General

Brand	Terex
Model	Fuchs MHL380 D
Category	Construction Equipment
Language	English