Terex Fuchs MHL380 D User Manual

MALFUNCTION 8
MHL380 D 8.1
8 Malfunction
8.1 General
Warning and fault messages:
 Various faults are indicated by correspond-
ing LEDs or messages on the multifunction
display.
h Chapter 4 Display and control elements.
 Some warning functions are also supported
by an audible signal (buzzer).
Detecting and correcting malfunctions and
errors:
►
Malfunctions are often caused by incorrect
operation or maintenance of the machine.
Each time a malfunction occurs, you
should therefore read the corresponding
chapter in the operating instructions care-
fully again.
►
Analyze the cause of the malfunction and
correct it immediately.
►
If you contact your TEREX | Fuchs dealer
or Customer Service, please describe the
malfunction and all accompanying circum-
stances as precisely as possible. Exact in-
formation makes it possible to find the
cause of the malfunction quickly and elimi-
nate it. Precise information about the ma-
chine type and vehicle ID number are also
required.
►
Do not perform any work for which you
have not been trained and instructed.
ATTENTION
If you cannot detect or remedy the
cause of the malfunction using the
malfunction table, contact your
dealer or a TEREX | Fuchs service
engineer.

Terex Fuchs MHL380 D Specifications

General

Brand	Terex
Model	Fuchs MHL380 D
Category	Construction Equipment
Language	English