2 SAFETY AND ACCIDENT PREVENTION
2.10 MHL380 D
2.2.9 Towing the machine safely
 Always observe the correct procedure.
h Chapter 6.1 Towing the machine
 The machine may be towed only in
exceptional cases, for example to bring the
machine away from a dangerous site for
repair.
 Check that all trailing and towing devices are
safe and secure when pulling or towing.
 Towing equipment such as cables, rods,
etc., must have sufficient tensile strength
and must be fastened to the designated
towing lug on the undercarriage. Damage
and accidents that occur when towing the
machine do not fall under the warranty
obligation of the manufacturer.
 When towing, make sure that no-one is in
the vicinity of the towing equipment.
 Keep the cable taut and avoid kinks.
 Take care when pulling the cable taut.
Sudden jerks can cause sagging cables to
tear.
 When towing, comply with the specified
transport position, permissible speed and
distance.
 Restore the machine to its proper condition
after towing.
 When putting the machine back into
operation, proceed solely in accordance with
the operating instructions.