DISPLAY AND CONTROL ELEMENTS 4
MHL380 D 4.77
â–º
Travel direction forward (related to the
steering axle)
Forward travel is initiated by pressing the
pedal (114/17).
â–º
Travel direction reverse (related to the
steering axle)
Reversing is initiated by pressing the pedal
(114/18).
Danger of injury due to uncon-
trollable driving statuses
• Only change from forward to re-
verse traveling and vice versa
when the machine is at a stand-
still. Do not reverse.
In an emergency: Administer first
aid, seek treatment from a doctor
The speed of travel is controlled using the travel
pedals (114/17) and (114/18). Operate the ser-
vice brake pedal (114/16) for braking and stop-
ping.
If the machine gets stuck on difficult terrain,
do not attempt to free it by rocking.
h See Chapter 6 Recovery, Loading and
Transport for details of how to proceed.
Machines carrying loads with laterally shifted
uppercarriage must travel only on level
ground and with the oscillating axle locked.
The oscillating axle is locked using the
pushbutton (114/78).
h Chapter 5.1.8 Oscillating axle lock release
To Next Page
Loading...
Need help?
General
