Terex Fuchs MHL380 D User Manual

4 DISPLAY AND CONTROL ELEMENTS
4.86 MHL380 D
►
In the "Speed and FINE MODE" menu, set
the engine speed to idle (0%) and run the
diesel engine at idle for a short time to al-
low it to cool down.
h Chapter 4.4 Menu levels in the multi-
function display
►
Switch off the diesel engine and turn the
ignition key to "0".
►
Wait at least 30 seconds, then turn the
ignition key to "I" and wait about 5 seconds
for the machine control unit to start up.
Press and hold down the pushbutton
(123/79) and briefly actuate all hydraulic
levers in order to relieve the hydraulic sys-
tem of pressure.
►
Turn the ignition key to "0" and withdraw it.
►
Fold up the left armrest (123/13).
►
Lock the cab, as well as all windows and
skylights, to prevent unauthorized access.
►
The machine must be cleaned at regular
intervals.
123

Terex Fuchs MHL380 D Specifications

General

Brand	Terex
Model	Fuchs MHL380 D
Category	Construction Equipment
Language	English