Terex Fuchs MHL380 D User Manual

7 CARE AND MAINTENANCE
7.20 MHL380 D
If the acid tester indicates a lower value, the
battery is discharged to some extent and must
be recharged.
ATTENTION
Maintenance-free batteries need not be
checked.
Removing a battery
►
Remove the cover.
►
When disconnecting the battery, always
disconnect the negative pole first. Other-
wise there is a risk of short circuit!
►
Remove the fastening and take out the
battery.
Charging a battery
►
Unscrew the caps.
►
Charge the battery with a standard com-
mercial battery charger. Follow the manu-
facturer’s instructions.
►
Screw on the caps.
Installing a battery
►
Install the new or charged battery and at-
tach the fastening.
►
Clean the connection terminals and battery
poles with fine-grain sandpaper.
►
When connecting the battery, connect the
positive pole first, then the negative pole.
Otherwise there is a risk of short circuit!
Ensure good contact to the terminal con-
nections. Tighten the terminal screws
hand-tight.
►
Lubricate the assembled terminals with
acid-free and acid-resistant grease (pole
grease).
►
Replace the cover.
The battery charge should be closely moni-
tored in winter in particular.

Terex Fuchs MHL380 D Specifications

General

Brand	Terex
Model	Fuchs MHL380 D
Category	Construction Equipment
Language	English