Quadra 4 Operator Manual
Tomtec
142
The default location for this file is in the application's database folder, C:\Program
Files\Tomtec\Quadra 4 Command System v4\Database.
program_name.PRG - Quadra 4's program files. These files are created by the user
and are either kept in the default programs folder, C:\Program
Files\Tomtec\Quadra 4 Command System v4\programs, or anywhere on your
network. The programs can be write protected by using the windows file management,
EXPLORE.EXE.
program_name.log - Quadra 4's program runtime log. The log file is created when the
program is run. it has the same name as the program, or it can have the a time-date
stamp incorporated in the file name. The runtime log records every step of the program
along with the time it was run and it also records any errors and the handling of the
error. The log file is stored in the default log folder, C:\Program
Files\Tomtec\Quadra 4 Command System v4\logs, the program's folder, or
anywhere on your network. The location and name settings can be set via the Options
Menu .
program_name.bar - Quadra 4's program Barcode log. This log contains all the
barcodes read by the program. Its name and creation will track the runtime log's
settings.
program_name_mm_dd_yyyy_hh_mm_ss_aa.eor - Quadra 4's end of run report.
This is a detailed report of the program. It contains the actual program, the runtime
log(s), pump calibration table that was used, the configuration settings, and the system
parameter settings. The data recorded by this log can be used for repeatability of the
program. This report is enabled via the Options Menu and the Logging Options utility.
Note that changes in the above files can be logged by using the Tomtec FileSystem
Watcher Service. Refer to Section 11.0 Tomtec FileSystem Watcher Service
(21CFR Option)
)” on page 149.
To Next Page
Loading...