Quadra 4 Operator Manual
Tomtec
43
2.6.4 Database Menu
Edit Plate, Reservoir, and Fixture Database – Refer to Section “4.0 Database Editor”
on page 94.
Configure Default Plates
– Refer to Section “5.2 Default Plates” on Page 101.
Configure Default Reservoirs - Refer to Section “5.3 Default Reservoirs” on page 102.
Configure Displayed Fixtures - Refer to Section “5.8 Displayed Fixtures” on page 106.
File Management – Plate & Fixture Databases - Refer to section “10.1 File
Management – Plate & Fixture Databases” On Page 143
2.6.5 Tools Menu
Serial Dilution Wizard – Refer to Section “7.1 Tools Serial Dilution Wizard” on page
125.
To Next Page
Loading...