Quadra 4 Operator Manual
Tomtec
159
11.3 Providing 21CFR Part 11 Security for the Quadra 4
For this example, the File System Watch software is configured as follows:
We are monitoring two directories ( C:\Program Files\Tomtec\Quadra 4 Command
System v4\logs and C:\Program Files\Tomtec\Quadra 4 Command System v4\programs
) The results of our monitoring will be stored in the directory C:\LogDir, which will need
file permissions set so that only authorized people can access it ( presumably the
FSWatch directories will receive similar protection ).
Running a Quadra 4 program will leave a log file in the designated directory. Because
we configured FSWatch to monitor that directory, writing the file will be noted in the
FSWatch log:
To Next Page
Loading...