Quadra 4 Operator Manual
Tomtec
116
6.5 System
Set System
Connect will start communication with the Quadra and set the Quadra under
remote control. Connect is required before any other action.
Disconnect will end communication with the Quadra and return the Quadra back to local
control. Initialize System will reset all devices on the Quadra to their default positions.
6.6 Trap Operations
Standard Trap:
Trap Control
Refresh Status will update the adjacent progress bar to indicate the current level of fluid
in the flow wash trap.
Empty Trap will empty the trap
To Next Page
Loading...