Quadra 4 Operator Manual
Tomtec
52
3.4 AutoTrap Operations
This operation provides control for the AutoTrap.
Conditions
None
Remarks
Turn On Filtering and Turn Off Filtering starts and stops plate filtering through a
vacuum box attached to the AutoTrap.
Check Trap and Prompt will perform a check of the liquid level in the trap. If it is full,
the program will pause and the user will be prompted to empty.
Important Note:
Powered accessories such as Vacuum Traps, Autotraps, and Shaker
Nests, should not be connected with the Quadra 4 powered on. Please
turn off AC
power
BEFORE
connecting these accessories.
To Next Page
Loading...