Quadra 4 Operator Manual
Tomtec
63
Remarks
Infeed From Stacker(s)
Selects stacker or stackers to infeed plates to the shuttle. For a simple Program loop,
set this value to “No Stackers”.
Outfeed To Stacker(s)
Selects stacker or stackers to outfeed plates from the shuttle.
Number Of Cycles
The number of cycles to run the enclosed steps.
Disable Lid Capability
Disable Lid Capability indicates that if the stacker supports lids than the plate
being processed does not have one. This is necessary for thin plates.
3.14 Magnetic Nest
A stacker accessible nest that can be fitted with a variety of magnet
configurations for 96 or 384 well plate processing of magnetic and paramagnetic
beads/particles. The magnetic surface or probes are moved by programming the
Quadra to deliver pressurized air to the nest bladder which raises the magnetic platform
Conditions
A Magnetic Nest has to be present on the selected shuttle position.
To Next Page
Loading...