Quadra 4 Operator Manual
Tomtec
72
3.23 Quit
Stops the program and parks the shuttle at a specified position.
Conditions
There are no physical requirements for this function.
Remarks
Shuttle Position
Select the shuttle position you wish to stop the shuttle at the completion of the program.
3.24 Restack Plates
Restack Plates is the repeated Infeed of a plate from one stacker and Outfeed that plate
to another stacker.
Conditions
A plate capable fixture must be located on a shuttle position that has access to both the
source and destination stackers.
Remarks
To Next Page
Loading...