Quadra 4 Operator Manual
Tomtec
78
Conditions
There are no requirements for this function.
Remarks
Clear Shuttle Layout
Clear Shuttle Layout gives the user an empty shuttle to work with when changing the
fixtures and components.
Import Previous Shuttle Layout
Import Previous Shuttle Layout brings all of the hardware previously installed on the
shuttle, and allows the user to add/change the existing fixtures and components.
Pause On Layout Change
Pause On Layout Change will pause the running program, and post the message typed
into the Edit Box below. The user has an infinite amount of time to change the layout of
the shuttle. The program will not resume until the user clicks the OK Button.
3.29 SPE Pressure Vacuum Operation
The SPE Pressure/Vacuum function allows for both positive pressure and vacuum to be
applied to a filter plate.
Conditions
This function requires that the vacuum controlled mini-trap and the software controlled
pressure regulator options be installed.
To Next Page
Loading...