Quadra 4 Operator Manual
Tomtec
47
Quadra96 to Quadra 4 Program Conversion - This will guide you through the
procedure to convert a Quadra96 program to run on the Quadra 4.Quadra 96 to Quadra
4 Program Conversion
Tomtec FileSystem Watcher Service (21CFR Part 11 option) - This section will
appear if the optional software package has been installed and is running.
About – Displays information about the currently running Software and Hardware
versions, similar to this:
Note that the command system version and build number should be used whenever you
have to correspond with Tomtec.
To Next Page
Loading...