Quadra 4 Operator Manual
Tomtec
74
Remarks
Number of Dilutions
Depending on plate type and tip arrangement, the number of dilutions can range from 1
to 24.
Mix/Xfer Aspirate Height
Aspirate Height is the height at which the tips will aspirate from the well. This allows you
to aspirate from wells filled to a variable amount, without sucking in any air.
Mix/Xfer Dispense Height
Dispense Height is the height at which the tips will dispense into the well. This allows
you to dispense to wells filled to a variable amount, without creating air pockets within
the wells.
Initial Dispense Volume
The initial concentration pipetted from a sample plate.
Plate Direction
The direction in which the dilution is performed. This depends on the plate and
tip arrangement.
To Next Page
Loading...