Quadra 4 Operator Manual
Tomtec
88
Mix/Wash Cycles
See Mix Function.
Aspirate Speed
See Aspirate Function.
Aspirate Height
See Aspirate Function.
Dispense Speed
See Dispense Function.
Dispense Height
See Dispense Function.
Wash Delay Timers
Pre-wash time and post-wash time are used with flow wash. Pre-wash time is the
number of seconds to delay before pipetting after water flow has started. Post-wash
time is the number of seconds to delay before turning off the water flow after pipetting.
Dry/Rinse Tips
The Dry/Rinse Tips option allows the user to blow out an air gap at the end of the wash.
Timed Dispense
See Timed Dispense Function.
Drop Stage after Tip Wash
See Additional Options.
To Next Page
Loading...