Topcon Compu-Vision CV-5000 User Manual

131
6. CONVENIENCE FUNCTIONS
SELECTING THE TYPE OF OCCLUSION
The occlusion plate is used when the program performs occlusion automatically. The type of
occlusion can be changed.
The type of occlusion that has just been changed will remain until resetting is done. After
resetting, the value saved by setting is set again.
Click the [Occlude/Fog] button, and the menu is displayed.
Click the right mouse button for the auxiliary lens area on the test screen. The type of
occlusion is changed in order.
Button Example of
display
Operation by clicking
[Occlude] The occlusion plate is used.
[Fog: +2.00] The spherical lens of "+2.00D" is used.
[Fog: +1.50] The spherical lens of "+1.50D" is used.
[Fog: +0.75] The spherical lens of "+0.75D" is used.
[Fog: Manual]
Disables the occlusion controlled automatically by the
program.
To control occlusion, the operator must set and cancel
the fog of the occluded eye manually.

Topcon Compu-Vision CV-5000 Specifications

General

Brand	Topcon
Model	Compu-Vision CV-5000
Category	Medical Equipment
Language	English